**** Commodore16.com ****

Commodore 16/Plus 4 website to provide support and gaming

Archive for the ‘Upgrades & Mods’ Category

Category: Upgrades & Mods

I’ve added a little extra to Baz’s fantastic video’s. This explains how to convert cassettes to tap files using the menu264.

Category: Upgrades & Mods

Concept and design by Crock, which is what most 264 owners would appreciate due to the nature of our machines. Demonstration of a diagnostic cartridge and harness used for diagnosing hardware faults on Commodore 16, 116 and Plus/4 range of computers. You can follow progress of this project on Plus4World or on our forums.

Category: Upgrades & Mods

From today you now can purchase the XU1541 adapter from our site shop.  The XU1541 was originally developed by Till Harbaum and the project was abandoned. But its now still well alive, thanks to our resident engineer Jurek. This adapter is the modern version of the parallel port X1541 cable but now with USB capabilities. […]

Category: Upgrades & Mods

This card emulates an EPROM-modul on expansionport in bank a and f. You can use it for developing new modul-software, for often used programs and as setup-memory for OS96. The datas are backuped with a battery. The card is fully softwarecontrolled. Cards with more than 64kb has more 64kb-areas. There is a switch for the […]

Category: Upgrades & Mods

This EPROM-Burner for the plus/4-userport burns all EPROMs from 2764 to 272001 and the CMOS-types. You select the type at the burner with 4 switches and in the program. The connection is over the userport and the datasette-port. You can use EPROMs with burnvoltage 12,5V and 21V. The burner comes with the 32- pin-Textool, software […]