|
Hardware -
My Hardware
|
|
Written by Administrator
|
|
Saturday, 12 September 2009 00:00 |
|
264 Hardware
4 Bit Digitizer (by Solder)
For connection with the userport from the plus/4. Compatible to the software from SAM-digitizer in the "Compute mit". The digitizer can simply adjust. Connectors: 3,5mm-Cinch-Stereo for Walkman®, recoder or HiFi-Device. Connection for a headphone for control the signal.
|
264 Speed King Joystick
|
ANCO Turbo Plus Cartridge V1.0
|
ANCO Turbo Plus Cartridge V1.02
|
Cartridge Expander (by Solder)
With this card you can use 3 modules WITH DIFFERENT FUNCTION (e.g. a SID-card, a SRAM-Card and a RS232-card) at the same time on expansionport.
|
| Misc Catridge Roms
|
Digi-Blaster (by Solder)
Without soldering connect this card with your sid-card. With 8-bit-digital/analogconverter for digital-out and 8-bit-sampler for digital-in. This card take the signal from "audio in"-port at the SID-card.
|
SID Card (by Solder)
Sounds from C64 now for plus/4! Plug the card in expansionport and ready. You can adjust the volume on the card. You can hear the sound over the plus/4 or take it over a 3,5mm-Stereo-Cinch for HiFi-Device. 9-pin-SUB-D (kompatible to C64) for a 3rd joystic or a proportional-mouse.
|
Eprom Burner (by Solder)
This EPROM-Burner for the plus/4-userport burns all EPROMs from 2764 to 272001 and the CMOS-types. You select the type at the burner with 4 switches and in the program. The connection is over the userport and the datasette-port. You can use EPROMs with burnvoltage 12,5V and 21V
|
Joystick Extender
|
| 64KB SRAM CARD (by Solder)
|
Printer Cable
|
Trojan Light Pen
|
RS232 Cable with adapter
|
C64 Tape on 264 Machines adapter
|
| Jurek's 64k of RAM
|
Jurek's Null Modem
|
RAM Electronics 16k upgrade V1
|
RAM Electronics 16k upgrade V2
|
Interface 1 (Tape Copier)
Instructions Download
|
| Plus 4
|
C16
  
  
  
|
C116
 
|
| Plus 4, upgraded to 256k and with SRAM upgrade (by Solder)
|
|
|
|
|
Last Updated on Saturday, 12 September 2009 08:03 |
